Waeco SP-900 Installation Manual download pdf (Page 14)

Scope of delivery

CoolAir

4 Scope of delivery

CoolAir SP-900

5Installation

Caution

The air conditioner may only be installed by qualified personnel from a

specialist company. The following information is intended for specialists

who are familiar with the guidelines and safety precautions to be applied.

5.1 Prescribed installation method

The condenser unit (see Fig. 1 on page 3, 2) is attached to the firm and

straight rear panel of the cab or by means of a firm fastening frame. The

evaporator unit (see Fig. 1 on page 3, 1) is fitted on the inside of the rear

panel of the cab.

The connection line (see Fig. 1 on page 3, 3) can only be installed after

fitting the evaporator unit and the condenser unit.

The condensation from the evaporator unit is automatically drained off.

This purely physical function is only possible within certain angles of incli-

nation of the cab. Horizontal inclination during operation should not exceed

10°, vertical forward inclination should not exceed 18°.

The lorry's split air conditioner consists of the following components:

Part designation Quantity Item no.

CoolAir SP-900 air conditioning unit

consisting of:

- Condenser unit

- Evaporator unit with connection line

1 9100100002

4442700183

4442700184

Remote control (incl. type CR2025 battery) 1 4441600084

Battery cables 2 x AWG 8 1 4441300097

Operating manual 1 4445100326

Installation manual 1 4445100327

Installation template, evaporator unit 1 see

packaging

Installation template, condenser unit 1 see

packaging

No. in fig. 15 Designation

1 Condenser unit

2 Evaporator unit

3 Connection lines

SP-900-Install.book Seite 34 Montag, 25. Januar 2010 4:53 16

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 28 29

No comments

Waeco SP-900 Installation Manual Page 14