Waeco SP-900 Installation Manual download pdf (Page 11)

Safety instructions

CoolAir

1.1 Using the device

 Only use the air conditioner for the purpose specified by the manufacturer

and do not make any alterations or structural changes to the device.

 Only operate the air conditioner if you are certain that the housing and

the cables are not damaged.

 Installation, maintenance and repair work may only be carried out by

qualified personnel from a specialist company who are familiar with the

risks involved and the relevant regulations.

 Do not use the air conditioner near flammable fluids or in closed rooms.

 Do not reach into air grilles or ventilation nozzles or insert any foreign

objects in the system.

 Do not open the system in the event of a fire. Use approved

extinguishing agents instead. Do not use water to extinguish fires.

 Switch off the air conditioner before using automatic washing equipment

(automatic car washes etc.) to clean the vehicle.

 Disconnect all connections to the power supply when carrying out work

on the device.

 The system must be switched off before you tilt the cab.

1.1.1 Handling electrical cables

 The electrical cables might be laid over sharp edges. Use ducts or

tubes to prevent damage.

 Do not lay loose or bent cables next to electrically conductive materials

(metal).

 The electrical power supply may only be connected by a

qualified workshop.

SP-900-Install.book Seite 31 Montag, 25. Januar 2010 4:53 16

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 28 29

No comments

Waeco SP-900 Installation Manual Page 11