Waeco CF-35 Instruction Manual Page 19

  • Download
  • Add to my manuals
  • Print
  • Page
    / 24
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 18
EN
CoolFreeze Operation
37
6.10 Replacing the plug fuse (12/24 V)
Pull the adapter sleeve (fig. 7 4, page 5) off of the plug.
Unscrew the screw (fig. 7 5, page 5) out of the upper half of
the housing (fig. 7 1, page 5).
Carefully raise the upper half of the housing from the lower
(fig. 7 6, page 5) half.
Take out the contact pin (fig. 7 3, page 5).
Replace the defective fuse (fig. 7 2, page 5) with a new one
that has the same rating (8A 32V).
Re-assemble the plug in the reverse order.
6.11 Replacing the light bulb
Press the switch pin (fig. 8 2, page 5) downwards so that the
transparent part (fig. 8 1, page 5) of the lamp can be removed
at the front.
Replace the light bulb.
I
NOTE
The LEDs in the light bulb must be aligned with the transparent part
of the lamp.
Press the transparent part of the lamp back into the housing.
Page view 18
1 2 ... 14 15 16 17 18 19 20 21 22 23 24

Comments to this Manuals

No comments